Mining-Rig VIVONAS Mining Rig Frame Up to 6/8 GPU

VIVONAS Mining Rig Frame

1. Construction:

Start by assembling the VIVONAS Mining Rig Frame according to the following steps:

1. Collect all the components, including the frame pieces, screws, and brackets.
2. Identify the front, back, top, and bottom sections of the frame.
3. Attach the side panels to the front and back sections using the screws provided.
4. Secure the top section onto the assembled side panels.
5. Attach the bottom section to the assembled frame.

2. GPU Installation:

Follow these steps to install up to 6/8 GPUs:

1. Ensure the power supply is disconnected.
2. Locate the GPU slots on the frame and remove any protective covers.
3. Insert the GPUs into the slots, ensuring they are properly aligned.
4. Secure the GPUs in place using the provided brackets and screws.

3. Cable Management:

To ensure efficient cable management, follow these guidelines:

• Start by organizing the power cables and data cables separately.
• Route the cables along the designated cable management channels on the frame.
• Use cable ties or zip ties to secure the cables in place.
• Avoid bending cables excessively to prevent damage or interference.

4. Power Supply Connection:

Connect the power supply to the GPUs and other components as follows:

1. Identify the power connectors on the GPUs and power supply.
2. Connect the appropriate cables from the power supply to the GPUs.
3. Ensure all connections are secure.
4. Connect the power supply to a reliable power source.

5. System Configuration:

Once the rig is assembled and powered on, follow these steps to configure the system:

1. Install the operating system and necessary drivers for the GPUs.
2. Configure the mining software to recognize and utilize the GPUs.
3. Optimize the mining settings for optimal performance and profitability.
4. Monitor the rig’s temperature and performance regularly to ensure stable operation.